Researchers have identified a stable processing window for laser powder bed fusion (LPBF) of WE43 magnesium alloy, achieving a relative density of 99.7 percent with a margin of error of plus or minus 0.3 percent. This study, published in the Journal of Materials Science, systematically investigates the forming, microstructure, and mechanical properties of the alloy when fabricated using LPBF. The work addresses a significant challenge in magnesium alloy processing: the high susceptibility of these materials to oxidation, evaporation, and pore formation during additive manufacturing. By varying scanning speed and hatch spacing, the team established parameters that balance strength and ductility, which has historically been difficult to achieve in this material class.
The optimized processing conditions identified in the study involve a laser power of 110 watts, a scanning speed of 400 millimeters per second, a hatch spacing of 75 micrometers, and a layer thickness of 40 micrometers.
Microstructural characterization of the LPBF-fabricated WE43 alloy revealed four distinct morphological regions within the melt pool. These regions are described as net-like, lamellar, equiaxed dendritic, and diffuse flake-shaped.
Further analysis using electron backscatter diffraction (EBSD) showed significant grain refinement in the fabricated alloy. The average grain size was measured to be approximately 3 micrometers. Additionally, the EBSD analysis identified a preferential [0001] crystallographic texture along the building direction.
The study also examined elemental segregation within the microstructure. It was observed that the rare earth elements neodymium (Nd), yttrium (Y), and gadolinium (Gd) exhibited preferential enrichment in the dendritic and flake-shaped regions. The correlation between these morphological features and elemental distribution provides quantitative insights into the relationships among processing parameters and melt-pool microstructure.
Mechanical testing under the optimized processing conditions demonstrated significant improvements in the alloy’s performance. The LPBF-fabricated WE43 alloy exhibited an ultimate tensile strength of 285 megapascals with a standard deviation of 5.6 megapascals. The yield strength was measured at 269 megapascals with a standard deviation of 7.2 megapascals. Furthermore, the alloy achieved an elongation of 10.5 percent with a standard deviation of 0.5 percent. These values represent a substantial enhancement compared to the as-cast alloy, with increases of approximately 59.2 percent in ultimate tensile strength, 103.8 percent in yield strength, and 98.1 percent in elongation.
The study establishes a stable processing window for LPBF-fabricated WE43 magnesium alloy. The results provide quantitative insights into the relationships among processing parameters, melt-pool microstructure, elemental segregation, and mechanical properties.
Subject of Research: Laser powder bed fusion processing of WE43 magnesium alloy
Article Title: Laser powder bed fusion(LPBF) of WE43 magnesium alloy: forming, microstructure and mechanical properties
Article References: Liu, S., Liu, Y., Hao, W.-J., Zhu, J.-Q., Yan, X.-C., Yao, G.-R., Chang, C., & Guo, H.-J. (2026). Laser powder bed fusion(LPBF) of WE43 magnesium alloy: forming, microstructure and mechanical properties. Journal of Materials Science. https://doi.org/10.1007/s10853-026-14016-9
Image Credits: AI Generated
DOI: 10.1007/s10853-026-14016-9
Keywords: Laser powder bed fusion, WE43 magnesium alloy, Additive manufacturing, Microstructure, Mechanical properties, Grain refinement, Relative density, Crystallographic texture, Laser, powder, fusion, LPBF

